Switching To Speakerphone Mode; Switching To The Handset - Siemens HiPath Series Operating Instructions Manual

Making Calls – Basic Functions
Step by Step
Speaker
Release
Speaker
14
Ending the call:
Press the key. The LED goes out.
or
Press the key.
Notes on speakerphone mode:
• Tell the other party that you are using speakerphone
mode.
• The speakerphone works bests at a low receiving
volume.
• The ideal distance between the user and the tele-
phone set in speakerphone mode is about 50 cm
(approx. 20 inches).

Switching to Speakerphone Mode

Precondition: You are conducting a call with the hand-
set.
t
and Hold down the key and replace the handset.
(in the U.S.: press the key once and replace the hand-
set). Then release the key and continue the call.

Switching to the Handset

Precondition: You are engaged in a call in speaker-
phone mode.
n s
and Lift the handset. Continue the call.
This function is not available with
optiPoint 500 economy and optiPoint 500 basic.
This function is not available with
optiPoint 500 economy and optiPoint 500 basic.