Appointments Function; Saving Appointments - Siemens HiPath Series Operating Instructions Manual

Step by Step
US: End?
UK: Exit?
US: Program another key?
UK: Another key?
Program/Service
* 46=Timed reminder on?
If necessary
One time only?
Daily?
US: Save?
UK: Save entry?
Confirm.
or
Select and confirm.
.

Appointments Function

You can tell your telephone to give you a call when you
want to be reminded of an appointment
To do this, you need to save the time you want the call
to be made. You can enter a single appointment that will
take place in the next twenty four hours, or you can en-
ter a daily recurring appointment.

Saving Appointments

Press the key. The LED lights up.
Confirm.
or
qhj
Enter the code.
o
Enter a 4-digit time, such as 0905 for 9:05 (= 9.05 a.m.)
or 1430 for 14.30 (= 2.30 p.m.).
f k
or If the selected language is "US English" (configure
Page 28) you can enter the code 2 for "am" or 7 for
"pm" (standard = "am").
Confirm.
or
Select and confirm.
Confirm.
Saving Functions, Procedures and Appointments
Select the stored procedure by pressing a key.
Procedures containing functions which can be
switched on/off can be activated by pressing the
key, and deactivated by pressing the same key
again.
You can also press a procedure key during a call.
The stored digits are automatically sent as DTMF
signals Page 52.
Page 62.
61