Init Nav; Parameters - Simrad AP27 Manual

Simrad AP26 and AP27 Autopilots
Proceed to next menu item by pressing STBD button.

Init NAV

Sets a firm or soft approach to the track line when entering the
NAV mode at the first leg. The approach angle is dependant
(adaptive) on the distance (XTE) from the track line and the boat
speed.
Proceed to the "Parameters" item by pressing the STBD button
or return to STANDBY mode by pressing the STBY button.
4.8

Parameters

104
Rotate the course
clockwise until the transition
speed is set to the desired
value in knots.
Range: OFF – 30 knots
Default: 5 knots
Select firm or soft approach to
the track line by rotating the
course knob.
Range: Firm - Soft
Default: Firm
To access the Parameters,
rotate the course
clockwise.
A boats steering parameters
found by the
tuning can be looked at and if
needed changed under this
menu item. The
parameters can also be set
manually instead
performing an
tuning. The parameters are
divided into two sets:
dial
knob
Automatic
steering
of
Automatic
20221586B