Table of Contents
Advertisement
2150EX Area Velocity Flow Module
Section 3 Programming
3.1 Overview
Flowlink Help
3.2 Flowlink Connections
Figure 3-1 Connection to a Laptop, Using Cables P/N
60-2004-336 and 60-2004-339
This section describes how to set up the operation of a 2150EX
Area Velocity Flow Module using Isco's Flowlink software.
Note
The 2150EX requires Flowlink 4.1 or later. If you require two
minute data storage intervals, you will need version 4.16 or
later.
Detailed Flowlink instructions are beyond the scope of this
manual. Flowlink's operating instructions are available in a
Windows Help format. You can access the help topics for an
active window by clicking on its Help button or by pressing F1 on
your computer's keyboard. You can also access Help topics from a
Contents and Index window (H
the Flowlink menu).
To allow interrogation of data using a computer connected to
your 2150EX, you need to make the necessary connections to
allow your computer to communicate with the site. Figure 3-1
shows a connection using Isco's RS232EX Isolator Cable, P/N
60-2004-339 and EX Network Cable (P/N 60-2004-336). Note
that the computer must be positioned in a safe area. Use care in
connecting cables so you do not misalign the pins and cause a
short circuit.
Potentially Explosive Atmosphere
Safe Area
>C
I
ELP
ONTENTS AND
NDEX
RS-232 Serial Ports
COM1 or COM2
from
3-1
Advertisement
Table of Contents
