Table of Contents
Advertisement
7.3.2 Setting Mode Operation
Proceed as follows to select the desired item and check or change the setting values.
* Switch operation indicates the switches to press.
Moving to the menu display
Switch operation
−
Note1
Note1
Display example
10.00 m/s
Measured value being displayed (measurement mode)
100.0 %
Pressing
or more, the screen moves to the menu lock cancellation
ENTER111
screen.
000 V****
* Pressing
returns to the measurement mode.
Set the menu lock cancellation cord [111] by
pressing
ENTER111
* Pressing
111 V****
returns to the measurement mode.
Pressing
>1:SET
or more, the screen moves to the mode selection screen.
2:CNT CTRL
Select 1:SET in the mode selection screen and press
A1:EX CURRENT
* Pressing
Pressing
B1:UNIT 1
and a number) changes.
Pressing
* If the cursor is positioned at the digit of number, pressing
B1:UNIT 1
Likewise, set the function number to the one you want to check
C2:RANGE 1
or change by pressing
- 46 -
in the measurement mode for 3 seconds
MENU/ENT
in the mode selection screen, the mode
CANCEL
and
.
in the mode selection screen, the mode
CANCEL
in the measurement mode for 3 seconds
MENU/ENT
. Then the menu screen appears.
MENU/ENT
in the mode selection screen, the mode
CANCEL
returns to the measurement mode.
, the function number (a combination of a letter
, the cursor moves.
moves the cursor to the digit of letter.
6F8A0917
Description
and
.
Advertisement
Table of Contents
