Table of Contents
Advertisement
Changing the span value
The span value for each range is set.
The following is an example to show how to change the span value of Range 1 from 2.0m3/h to 100
l/min.
Switch operation
C2: RANGE 1
2.0000 m3/h
C2: RANGE 1
2.0000 m3/h
C2: RANGE 1
2000.0 l/h
33.333 l/min
C2: RANGE 1
33.333 l/min
C2: RANGE 1
13.333 l/min
100.00 l/min
C2: RANGE 1
100.00 l/min
C2: RANGE 1
Note: The items of unit are displayed cyclically as shown below:
Volumetric unit
3
m
qt
• A combination of m/min, m/h , m/d, ft/min, ft/h and ft/d cannot be selected.
Display example
Select C2: RANGE 1 from the setting item selection menu.
The currently set span value for Range 1 (2.0 m
example) appears.
The cursor appears.
Press
unit.
Change the volumetric unit to l.
Press
likewise change the unit to min. (Note)
↓
(The span value will be automatically changed as this unit is
changed.)
Move the cursor to the desired digit to change.
Change the number of the digit.
To change other digit, press
↓
the cursor to that digit and change the number there.
The display blinks and the set value is displayed for
confirmation.
Press
disappears and returns to the condition that the set value is
displayed.
Returns to the menu of setting item selection.
gal
ml
l
pt
ft
m
- 77 -
Description
further to move the cursor to the digit of volumetric
to move the cursor to the digit of time unit and
again to write the data. The cursor
MENU/ENT
Time unit
/s
bbl
/d
6F8A0917
3
/h in this
under this condition to move
/min
/h
Advertisement
Table of Contents
