Table of Contents
Advertisement
To return from the menu display to the measurement mode
Switch operation
C0: MEAS MODE
Note1: There is not this screen to the converter before serial No.072320999.
There is not software version (V****) to the converter before version V0109.
Note2:Pressing
CANCEL
Then pressing
MENU/ENT
minimum operations.
Display example
Set the digit of number for function number to "0" by pressing
The mode returns to the measurement mode (measured value
10.00 m/s
display screen).
100.0 %
changes the digit of number to "0" (*0:MEAS MODE).
under that condition brings you back to the measurement mode with
- 47 -
Description
and
(Note2). The digit of letter can be set to any letter.
6F8A0917
Advertisement
Table of Contents
