Transferring The Measured Data To A Pc - Vaisala HUMICAP HMP41 User Manual

M210316EN-A
4.

TRANSFERRING THE MEASURED DATA TO A PC

Give the communication parameters when using this terminal session for the
first time; save them for future use. See instructions in the following tables.
The communication parameters are:
Table 4.1 Giving parameters in Windows 3.1
MENU
P M
ROGRAM
ò
A
CCESSORIES
ò
T
ERMINAL
ò
Settings
ò
Communications
ò
File
ò
Save as
Turn the HMI41 on and follow the instructions in Ch. 4.2
connector according to your computer
baud rate 4800
data bits 7
stop bits 1
parity even
flow control none
DESCRIPTION
ANAGER
double click
double click
click
click and select parameters
(see list below); click OK
move the cursor to:
click
click and save settings: type
the name of the file (e.g.
HMI41) and click OK
HMI41 AND PROBES
Operating Manual
59