M210316EN-A
3.4
Reading the measurement results
RH
Td
T
Pabs
set min max
RH
T
RH
T
Td
T
RH
T
Turn the indicator on. Within 1 - 2 seconds press
%
°C°F
the button HOLD until the text
°C°F
g/m
Pa
then release the button.
hyst hold Lo bat Hi
Press twice the button MODE.
Press ENTER.
Numbers on the first line indicate the stored reading
of the quantity shown; numbers on the left of the
%
second line indicate the sequence number of the
°C
stored reading in the indicator memory. Numbers on
the right of the second line indicate the temperature
measured simultaneously with the first line reading.
The decimals of the T reading can be seen by
pressing the button ENTER:
%
The display returns to the previous display after a
°C
couple of seconds.
You can change the quantity on the first line by
°C
pressing MODE.
°C
To scroll all measurement results, press ENTER.
An arrow is displayed on the higher righthand
%
corner. Press HOLD while the arrow is displayed.
°C
Note that the sequence number changes.
HMI41 AND PROBES
Operating Manual
appears,
REC AUTO
57