Reading The Measurement Results - Vaisala HUMICAP HMP41 User Manual

M210316EN-A
Select the interval with buttons
selected in steps according to the following:
1 - 5 min: each pressing = 1 minute
10 min; 15 min; 30 min
1 - 6 h: each pressing = 1 hour
12 h
The text '
chosen interval; select a longer interval. When you press ENTER, a text
similar to the following appears:
RH
T
set
This is the measurement mode with the data collecting feature activated. It can
be distinguished from the normal measurement mode by the text '
lower lefthand corner of the display. The readings on the display are updated
once a minute, and the display is dim except during this updating in order to
minimize the consumption. If the indicator is turned off, the measurements
stored so far remain in the memory and they can be read by turning the
indicator on in the
You can end the data collecting by pressing ON/OFF.
6.5

Reading the measurement results

The measurement results can be read in the
entered from the
following appears:
Press ENTER, and a text similar to the following appears on the display:
RH
T
Numbers on the first line indicate the reading of the quantity in question (in
this example, RH). The number on the left on the second line (in this example
number 0.) is the sequence number of the measurement. This number helps to
' on the display indicates that there is not enough memory for the
LO
%
°C
mode (see section 6.5).
REC READ
mode by pressing twice the button MODE. The
REC AUTO
%
°C
and . The measurement interval can be
mode. This mode can be
REC READ
HMI41 AND PROBES
Operating Manual
' on the
SET
23