Manual Data Collecting - Vaisala HUMICAP HMP41 User Manual

M210316EN-A
6.2

Manual data collecting

For manual data collecting, press the button MODE and the following appears:
Press ENTER and a text similar to the following appears:
RH
T
set
The probe is now taking measurements and you can store the readings at
appropriate intervals by pressing the button HOLD. Each time you store a
reading, its sequence number in the indicator memory appears for a couple of
seconds:
The indicator returns automatically to show the readings. You can store 199
measurement readings in the indicator memory (numbers 1 - 199). In
automatic data collecting, you can store 200 readings (0 - 199). End data
collecting by turning the indicator off. You can read the readings in the
mode (see Chapter 6.5).
READ
%
°C
HMI41 AND PROBES
Operating Manual
REC
21