Display Texts And Operating Commands - Vaisala HUMICAP HMP41 User Manual

M210316EN-A
1.

DISPLAY TEXTS AND OPERATING COMMANDS

The HMI41 is used by simply turning it on with the ON/OFF button. In the
following, you will find a summary of the display texts with explanations and
the operating commands.
ON/OFF: the HMI41 is turned ON or OFF
DISPLAY
RH
Td
T
Pabs
set min max hyst hold Lo bat Hi
RH
T
DESCRIPTION
The HMI41 has been turned on.
%
°C°F
°C°F
g/m Pa
'
The HMI41 software version and probe type
indication. If the software version does not
appear, it is less than 1.02 and the HMI41 can-
not be used with the HMP46; contact Vaisala or
a Vaisala representative. If the probe type indi-
cation (41.45 or 42.46) does not appear, the
indicator does not recognize the probe type
automatically; give the setting manually (see
Chapter 4 of this appendix). If the probe type
indication is replaced with text
that the probe is correctly connected.
Indication of the battery voltage.
bat Hi
Relative humidity and temperature readings are
%
output.
°C
HMI41 AND PROBES
Operating Manual
, check
NO PRB
49