HMI41 AND PROBES
Operating Manual
8.6
Selecting the probe type
set
If necessary, change the setting with buttons
completed the setup procedure; turn your indicator off.
36
The HMI41 setup contains further settings (start, baud,
seri and calib) that appear after probe type setting when
pressing ENTER. Start setting is changed only when
using the HMP44/44L probes (
Operating Manual). For calib, see Chapter 5. Other
settings are meant for the HMI41 used as a field
calibrator for other Vaisala humidity transmitters. It is
recommended that these settings are not changed.
and
NOTE
5, see the HM44
START
M210316EN-A
. You have now