Programming Of The Clock Timer - Vaillant recoVAIR/3 SERIES Operating And Installation Manual

Action Setting of
Operating mode
Selected symbol is flashing
Click
Turn the dial in order to change the operat-
Turn
ing mode.
You can select the following settings:
Day mode:
Irrespective of the time programme the
remote control switches the fans into
2nd stage.
Night mode:
Irrespective of the time programme the
remote control switches the fans into
1st stage
Automatic operation:
The change between the day and night
operation occurs depending on time. Ad-
ditionally, the current operating mode is
displayed.
Minimum operation
Irrespective of the time programme the
remote control switches the fans into the
lowest stage.
Fan stage 3
Display HIGH
Click
Turn the dial in order to set the period of
Turn
time. The 3rd fan stage is active at this time.
To deactivate this function, set the period
of time to "0.0".
Bypass in stand-by
Display
If no bypass unit is connected, this menu
Click
point will be left out!
Turn the dial to set the number of days dur-
Turn
ing which the bypass shall be in stand-by
mode. Under the correct temperature condi-
tions the bypass engine switches to summer
mode.
Check and setting of the time
Press the dial several times in order to se-
lect days of the week, hours and minutes as
required.The selected category flashes in the
Click
display.
Turn the dial to change days of the week,
Turn
hours and minutes.
Table 4.3 Operation from the basic display
Operating Manual recoVAIR/3 0020062918_03
Action Setting of
Check and setting of the year clock
Press the dial several times in order to se-
lect the day, the month and the year.
If the clock is not activated, this point will
Click
be left out!
Turn the dial in order to change the day, the
Turn
month and the year.
Check and reset of the filter timer
Display FILT
The timer indicates the number of days after
Click
the last reset since the filter has been used.
Turn the dial to the left to reset the timer to
Turn
0. Turn the dial to the right to reset the previ-
ous value.
Return to basic display
If no new setting is executed for more than 10
seconds, the display will automatically return
Click
to the basic display.
Table 4.3 Operation from the Basic Display (continued)
4.7

Programming of the Clock Timer

With the programming button you can change the times
for the timer mode. With activated timer, function reco-
VAIR will switch between the first and the second stage
(time-controlled)
• Outside the time window: Stage 1 = night operation
• Within the time window:
It is possible to set up to three different switching-on
and -off times (time windows) for each day of the week.
In the display of the remote control these time windows
are called H1, H2 and H3.
You can combine individual days in groups or a
week block. The following groups are possible:
MO - SU; MO - FR; SA - SU.
Factory-set operating times are:
Time window Day of the
week/Block
H1 MO-FR
H1 SA
H1 SU
Table 4.4 Factory-set operating times
The operating times are set as follows:
• Start with the P button to programme the times.
• Select the time window.
• Select a day or a week block.
• Determine the starting time.
• Determine the end time.
Handling 4
Stage 2 = day operation
Start time End time
6:00 22:00
7:30 22:30
7:30 22:00
9