Brake And Clutch Lever Adjusters - Triumph Speed Triple Handbook

Warning
For reasons of security and safety, always
move the ignition switch to the OFF
position and remove the key when leaving
the motorcycle unattended.
Any unauthorised use of the motorcycle
may cause injury to the rider, other road
users and pedestrians and may also cause
damage to the motorcycle.
Warning
With the key in the LOCK or P position the
steering will become locked.
Never turn the key to the LOCK or P
positions while the motorcycle is moving as
this will cause the steering to lock. Locked
steering will cause loss of motorcycle
control and an accident.
General Information
Brake and Clutch Lever
Adjusters
1
3
cdmj
1. Lever
2. Adjuster wheel
3. Triangular mark
An adjuster is fitted to both the front brake
and clutch levers on the Speed Triple. The
adjusters allow the distance from the
handlebar to the levers to be changed to one
of four positions, to suit the span of the
operator's hands.
To adjust the levers, push each lever forward
and turn the adjuster wheel to align one of
the numbered positions with the triangular
mark on the lever holder.
The distance from the handlebar grip to the
released lever is shortest when set to number
six (brake lever) or four (clutch lever) and
longest when set to number one.
2
29