Deleting The Scanned Data - Canon MP630 SERIES On-Screen Manual

Saving Scanned Data
Select Next, and press the
(2)
4.
Start scanning.
Confirm the message, press the OK button, then load an original on the Platen
(1)
Glass.
See Loading Originals to Copy or Scan
Note
The sizes of originals that can be scanned are A4, 8.5"x11" (LTR), 4"x6" (10x15cm), and
5"x7" (13x18cm).
Press the Color button for color scanning, or the Black button for black & white
(2)
scanning.
The machine starts scanning.
Check the preview of the scanned data on the screen.
(3)
Note
The preview screen will not appear if Preview OFF is selected in Advanced in the
procedure of (1) in step 3.
To rescan the original, press the left Function button to select Rescan. Confirm the
message and scan the original again.
To rotate the scanned data 90 degrees clockwise, press the right Function button to
select Rotate.
Press the OK button to save the scanned data.
(4)
The message "End scanning?" appears when scanning is completed.
Select End, and press the OK button.
(5)
Remove the original on the Platen Glass after scanning is completed.
Note
To scan the multi-page document into one file, select Continue, and press the
Then load the next page on the Platen Glass, and repeat the procedures from (2) in step 4.
Repeat the same procedure until you finish scanning all the pages.
Important
Do not remove the USB flash drive or turn off the power while the machine is operating.
Do not open the Document Cover or move the loaded original until scanning is completed.
The scanned data will be saved in the folder "CANON_SC" on the USB flash drive. You cannot
print the saved data using the Operation Panel on the machine.
Note
To remove the USB flash drive after scanning is completed, see
.
You can exit the Scan menu and select another menu, if you press the HOME button after
scanning is completed.

Deleting the Scanned Data

1.
Prepare for using a USB flash drive.
button.
OK
.
Removing the USB Flash Drive
Page 36 of 805 pages
OK button.