Canon MP630 SERIES On-Screen Manual page 87

Replacing Procedure
Important
You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in
the correct position according to the label on the Print Head Holder.
You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.
6.
Close the Scanning Unit (Cover) gently.
Caution
Be sure to hold the Scanning Unit (Cover) firmly using both hands, and be careful not to get
your fingers caught.
Do not hold the LCD or the Operation Panel.
Note
If the error message appears after the Scanning Unit (Cover) is closed, refer to "
" in the on-screen manual: Advanced Guide .
Troubleshooting
When you start printing after replacing the ink tank, the machine starts cleaning the Print Head
automatically. Do not perform any other operations until the machine completes the cleaning of
the Print Head.
If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head
position.
Aligning the Print Head
See
The machine may make noise during operation, but this is normal.
.
Page 87 of 805 pages
Page top