Canon MP630 SERIES On-Screen Manual page 604

Printing from a PictBridge Compliant Device
5.
Select DVD/CD print setting, then press the OK button.
6.
Use the or
button to change the print area.
7.
OK button.
Press the
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/
CD and make sure you set a value smaller than the measured value for the outer
diameter, and a value larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
8.
Use the or
OK button.
press the
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD
for the suitable density printing. If not, specify Other DVD/CD.
button to select Outer circle or Inner circle and use the
button to select Recommended DVD/CD or Other DVD/CD, then
Page 604 of 805 pages
or
Page top