Table of Contents
Advertisement
Message Appears on the Computer Screen
If you are using a relay device such as a USB hub, disconnect it, connect the machine
directly to the computer, and try printing again. If printing starts normally, there is a
problem with the relay device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try
printing again.
Check 3: Make sure that your machine's name is selected in the Print dialog
box.
Opening the Page Setup and Print Dialog Box (Macintosh)
Error Number: 1700 Is Displayed
Check: See
Contact the support center or service center for ink absorber
in
replacement.
appropriate action.
Ink Info Number: 1600 Is Displayed
Check: See
The following ink may have run out.
Displayed on the LCD
Ink Info Number: 1683 Is Displayed
Check: See
The remaining level of the following ink cannot be correctly
in
An Error Message Is Displayed on the LCD
detected.
action.
Ink Info Number: 1688 Is Displayed
Check: See
The following ink has run out.
the LCD
and take the appropriate action.
Error Number: 1851 Is Displayed
Check: Close the Inner Cover, then press the OK button on the machine.
Error Number: 1856 Is Displayed
Check: Close the Inner Cover, then press the OK button on the machine.
A page of print data being sent at the time of the error will be erased, so print that page again.
Error Number: 2001 Is Displayed
Check: See
The device may be incompatible.
on the LCD
and take the appropriate action.
Error Number: 2002 Is Displayed
Check: See
An unsupported USB hub is connected.
Displayed on the LCD
An Error Message Is Displayed on the LCD
and take the appropriate action.
and take the appropriate action.
and take the
in
An Error Message Is
and take the appropriate
in
An Error Message Is Displayed on
in
An Error Message Is Displayed
in
An Error Message Is
Page 739 of 805 pages
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
