Canon iP3600 SERIES On-Screen Manual page 47

Replacing Procedure
Important
You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in
the correct position according to the label on the Print Head Holder.
You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.
6.
Close the Top Cover.
If you replaced the ink tank during printing, the printer resumes printing automatically.
Note
If the lamp still flashes orange after the Top Cover is closed, refer to "Alarm Lamp
Alarm
Flashes Orange" in "
When you start printing after replacing the ink tank, the printer starts cleaning the Print Head
automatically. Do not perform any other operations until the printer completes the cleaning of
the Print Head. The
If printed ruled lines are printed or the print head position is misaligned, adjust the print head
position.
Aligning the Print Head
See
The printer may make operating noise when preparing for printing.
" of the on-screen manual: Advanced Guide .
Troubleshooting
lamp flashes green during cleaning.
Power
.
Стр. 47 из 366 стр.
Page top