Printing A Background - Canon iP3600 SERIES On-Screen Manual

Stamp/Background Printing
Note
The stamp is given priority because the stamp is printed over the document data in the
sections where the stamp and the document data overlap. If the Place stamp over text check
box is unchecked, the stamp is printed behind the document data and may be hidden in the
overlapping sections depending on the application used.
Stamp first page only
To print the stamp only on the first page, check this check box.
Define Stamp... button
To change the stamp text, bitmap, or position, click this (refer to Saving a Stamp Setting).
Complete the setup
5.
Click OK on the Page Setup tab.
When you execute print, the data is printed with the specified stamp.

Printing a background

Select the background for which the settings are to be changed
1.
Two bitmap files are pre-registered as samples.
Click Stamp/Background... on the Page Setup tab
2.
The Stamp/Background dialog box opens.
Select the background
3.
Check the Background check box, and select a desired background from the list.
The current settings are displayed in the Settings Preview on the left side of the Page Setup tab.
Set the background details
4.
If necessary, complete the following settings, and then click OK.
Background first page only
To print the background only on the first page, check this check box.
Select Background... button
To use another bitmap file or change the layout or density of a background, click this (refer to
Image Data to be Used as a Background
Complete the setup
5.
Click OK on the Page Setup tab.
When you execute print, the data is printed with the specified background.
Important
When the Borderless Printing check box is checked, the Stamp/Background... button appears
grayed out and is unavailable.
Note
The stamp and background are not printed on blank sheets inserted with the Insert blank page
function of Booklet Printing.
Related Topics
Saving a Stamp Setting
Saving Image Data to be Used as a Background
).
Стр. 219 из 366 стр.
Saving
Page top