Canon iP3600 SERIES On-Screen Manual page 298

Alarm Lamp Flashes Orange
Nine flashes:
The printer has not received a response
from the digital camera. The digital
camera or digital video camcorder
connected is not compatible with this
printer.
Thirteen flashes:
Ink level cannot be detected.
Fourteen Flashes:
Ink tank cannot be recognized.
Fifteen Flashes:
Ink tank cannot be recognized.
Sixteen Flashes:
Ink has run out.
absorber becomes completely full, contact a Canon service
representative. (You will need to replace a particular part of
the printer.)
Check the device connected to the printer. Printing
photos directly is possible only with a PictBridge
compliant device.
A communication time out occurs if an operation takes
too long or if it takes too much time to send data. This
may cancel printing. In such cases, disconnect and
reconnect the USB cable.
When printing from a PictBridge compliant device,
depending on the model or brand of your device, you may
have to select a PictBridge compliant print mode on the
device before connecting it to the printer. You may also
have to turn on your device or select Play mode manually
after connecting the device to the printer. Perform
necessary operations before connecting your device
referring to its instruction manual.
If the error is still not resolved, check if you can print
another photograph.
The remaining ink level cannot be correctly detected. (The
lamp on the ink tank flashes.)
Replace the ink tank and close the Top Cover.
Printing with an ink tank that was once empty may damage
the printer.
If you want to continue printing in this condition, you need to
release the function for detecting the remaining ink level.
Press and hold the
RESUME/CANCEL
seconds, and then release it.
With this operation, releasing the function for detecting the
remaining ink level is memorized. Please be advised that
Canon shall not be liable for any printer malfunction or
damage caused by refilled ink tanks.
Routine Maintenance
Note
If the function for detecting the remaining ink level is
disabled, the ink tank is displayed in gray on the printer
status monitor (Windows) and Canon IJ Printer Utility
(Macintosh).
Routine Maintenance
The ink tank is not compatible with this printer. (The lamp on
the ink tank is off.)
Install an appropriate ink tank.
Routine Maintenance
An Ink tank error has occurred. (The lamp on the ink tank is
off.)
Replace the ink tank.
Routine Maintenance
Ink has run out. (The lamp on the ink tank flashes.)
Replace the ink tank and close the Top Cover.
Printing under the current condition may damage the printer.
If you want to continue printing in this condition, you need to
release the function for detecting the remaining ink level.
Press and hold the
RESUME/CANCEL
seconds, and then release it.
With this operation, releasing the function for detecting the
remaining ink level is memorized. Please be advised that
Canon shall not be liable for any malfunction or trouble
which may be caused by continuation of printing under the
ink out condition.
Routine Maintenance
Note
Стр. 298 из 366 стр.
button for at least 5
button for at least 5