Replacing An Ink Tank - Canon MG6100 SERIES On-Screen Manual

> Routine Maintenance
Contents
C091

Replacing an Ink Tank

When remaining ink cautions or errors occur, the message will appear to inform you of the error.
Refer to "An Error Message Is Displayed on the LCD" in "
Advanced Guide , and take an appropriate action.
Note
For information on the compatible ink tanks, refer to the printed manual: Getting Started .
If print results become faint or white streaks appear despite sufficient ink levels, see
Becomes Faint or Colors Are Incorrect
Replacing Procedure
When you need to replace ink tanks, follow the procedure below.
Important
Handling ink
If you remove an ink tank, replace it immediately. Do not leave the machine with ink tanks removed.
Use new ink tanks for replacement. Installing used ink tanks may cause the nozzles to clog.
Furthermore, with such ink tanks, the machine will not be able to inform you when to replace the ink
tanks properly.
Once an ink tank has been installed, do not remove it from the machine and leave it out in the open.
This will cause the ink tank to dry out, and the machine may not operate properly when it is
reinstalled. To maintain optimal printing quality, use an ink tank within six months of first use.
Note
Color ink may be consumed even when printing a black-and-white document or when black-and-
white printing is specified.
Every ink is also consumed in the standard cleaning and deep cleaning of the Print Head, which
may be necessary to maintain the machine's performance. When an ink tank is out of ink, replace it
immediately with a new one.
For details, see Tips on How to Use Your Machine
1.
Make sure that the power is turned on, and open the Paper Output Tray gently.
2.
Lift the Scanning Unit (Cover) until it stops.
The Print Head Holder moves to the replacement position.
Caution
Do not hold the Print Head Holder to stop or move it forcibly. Do not touch the Print Head Holder
until it stops completely.
> Replacing an Ink Tank
Troubleshooting
.
.
Advanced Guide Troubleshooting
" of the on-screen manual:
When Printing