Canon MG6100 SERIES On-Screen Manual page 513

Advanced Guide > >
Scanning Scanning with Using the Operation Panel of the Machine
Memory Card/USB Flash Drive Using the Operation Panel of the Machine
U048
Saving Scanned Data on the Memory Card/USB Flash Drive
Using the Operation Panel of the Machine
You can save scanned data on the memory card or USB flash drive using the Operation Panel.
Important
Do not remove the memory card or USB flash drive from the machine under the following
conditions:
While scanning is in progress
Before saving the scanned data
You cannot use the memory card and USB flash drive at the same time. Be sure to use either of
them as a media for saving scanned data.
For safety reasons, we recommend backing up the scanned data saved on a memory card or USB
flash drive to another media periodically to avoid unexpected accidents.
We assume no responsibility for damage to or loss of data for whatever reason even within the
warranty period.
1. Make sure that the machine is turned on.
2.
Scan on the HOME screen.
Select
The Save/Forward to screen is displayed.
Note
For details on how to select a menu on the HOME screen, refer to
If the Scan standby screen for forwarding the data to the USB-connected computer is displayed
on the LCD, touch the left Function button to display the Save/Forward to screen.
3.
Insert the memory card into the Card Slot or insert the USB flash drive into the
Direct Print Port.
For information on how to insert the memory card into the Card Slot or information on the types of
the memory card compatible with the machine, refer to
Inserting the USB Flash Drive
See
4.
Select Memory card or
5.
Select Save to memory card or
Printing Photos
for how to insert the USB flash drive into the Direct Print Port.
USB flash drive, then touch the
Save to USB flash drive, then touch the
> Saving Scanned Data on the
Overview of the Machine .
.
button.
OK