Setting Threshold; Adjusting Threshold - Canon MG6100 SERIES On-Screen Manual

Advanced Guide > >
Scanning
> Setting Threshold
ScanGear (Scanner Driver)
S307

Setting Threshold

The brightness of color and grayscale images is expressed in a value between 0 and 255. However, in
creating black and white images, all colors are mapped to either black (0) or white (255). "Threshold" is
the borderline value that determines a color as black or white. By adjusting the threshold level, you can
sharpen text in a document or reduce show-through in newspapers.
This function is available when Color Mode is Black and White.
In ScanGear (scanner driver)'s Advanced Mode tab, click
Note
Click Defaults to reset all adjustments in the current window.

Adjusting Threshold

Move (Slider) to the right to increase the threshold value and thus increase the black areas. Move the
slider to the left to decrease the value and thus increase the white areas. You can also enter a value (0 to
255).
Scanning with Other Application Software >
Correcting Images and Adjusting Colors with
(Threshold).
Page top