Canon MG6100 SERIES On-Screen Manual page 885

The card is currently writable from PC.
Set to [Not writable from PC].
Power was not turned off correctly the last time.
Press the ON button when turning power off.
Cannot print the data.
error occurs, contact the service center.
The Card Slot is set to Writable from USB PC or
Writable from LAN PC.
You cannot print from the memory card or save the
scanned data to the memory card when the Card
Slot is set to Writable from USB PC or Writable
from LAN PC. After writing on the memory card,
select Not writable from PC in Read/write attribute
in Device user settings.
The power cord may have been unplugged last
while the machine was still on.
Touch the
OK button to dismiss the error.
Note
See Notice for Unplugging the Power Cord
for unplugging the power cord.
The specified data cannot be printed.
When you print the contents on CREATIVE PARK
PREMIUM, confirm the message on the computer
screen, make sure that genuine Canon ink tanks
are installed properly for all colors, then start
printing again.
Page top