Checking The Ink Status; With The Lcd On The Machine; With The Ink Lamps - Canon MG6100 SERIES On-Screen Manual

> Routine Maintenance
Contents
C092

Checking the Ink Status

You can check the ink status on the LCD or with the ink lamps.

With the LCD on the Machine

Make sure that the power is turned on, and touch the
(1)
The HOME screen will appear.
Select Setup
(2)
See Selecting Menus on the HOME Screen
The Setup menu screen will appear.
Select Display remaining ink level
(3)
A symbol appears in the area (A) if there is any information about the remaining ink level.
Example:
Ink tank is running low. Prepare a new ink tank.
Note
You can also check the ink status on a screen of the LCD displayed while printing.

With the Ink Lamps

Make sure that the power is turned on, and open the Paper Output Tray gently.
(1)
Lift the Scanning Unit (Cover) until it stops.
(2)
See step 2 in Replacing Procedure
Check the ink lamps.
(3)
Close the Scanning Unit (Cover) after confirming the ink lamp status.
See step 6 in Replacing Procedure
Ink lamp is on
The ink tank is correctly installed.
Ink lamp is flashing
> Replacing an Ink Tank > Checking the Ink Status
on the HOME screen.
.
, and touch the
.
.
Advanced Guide Troubleshooting
button.
HOME
button.
OK