Canon MG6100 SERIES On-Screen Manual page 792

*1 Photos are optimized for printing using the Photo optimizer pro function.
*2 Can be selected only on certain Canon-brand PictBridge compliant devices.
(May not be selected depending on the device.)
Trimming Default (Off: No trimming), On (follow the camera's setting), Off
Settings on the Machine
You can change the PictBridge print settings from the PictBridge print settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the
settings on the machine.
This section describes the procedure to display the PictBridge print settings screen. For setting
items, see PictBridge print settings
1.
Select Setup on the HOME screen.
Note
For details on how to select a menu on the HOME screen, refer to
Machine .
2.
Device settings, then touch the OK button.
Select
3.
Use the button to select PictBridge print settings, then touch the OK button.
4.
Check the message that is displayed, then touch the OK button.
The PictBridge print settings screen is displayed.
Note
Depending on the country or region of purchase, the screen to select a menu may be
displayed. In this case, use the
OK button.
.
button to select Photo print setting, then touch the
Overview of the
Page top