Adjusting The Label Length; Attaching Labels - Brother P-touch PT-2030 User Manual

Setting
• Use this setting when printing several
labels with minimum margins.
• Feed the tape before using the cutter.
Otherwise a part of the text may be cut off.
Do not try to pull the tape since this may
damage the tape cassette.
• After pressing Print, "OK to Feed?"
Chain
appears.
Press the Escape key to enter more texts
or press the OK or Enter key to feed.
• The final label is printed with an 9.4 mm
margin to the right of the characters. Use
scissors to cut off any part of this margin
that is not required.
You can adjust the length of the printed label in levels of -5 to +5.
1
Press the Setup key to display the setup menu, select "Adjust Length" using the
or key, and then press the OK or Enter key.
2
Select "Adjust Length" by using the
then set the value by using the
3
Press the OK or Enter key to apply the setting.
• Press the Escape key to return to the previous step.
• Press the Space key to set the value to default setting.
• Approximately 1% of the total label length will be adjusted by 1 level.
1
If necessary, trim the printed label to the desired shape and length using scissors, etc.
2
Peel the backing from the label.
3
Position the label and then press firmly from top to bottom with your finger to
attach the label.
Description

Adjusting the Label Length

or

Attaching Labels

*Feed the tape before
using the cutter.
or key, and
key.
Example
ABC ABC
9.4 mm
Adjusting the Label Length
1
2
3
4
5
6
7
8
9
46