Manual Cutting; Adjusting The Label Length Accuracy - Brother PT-2700 User Manual

LABEL PRINTING
When using Fabric Tapes or Strong Adhesive Tapes, set "On" for Manual Cutting
before printing. After printing, remove the tape cassette from the machine and use
scissors to cut the tape.
1
Press the
"Special Tape" using the
press the
2
Select the value by using the
3
Press the
• Press the
• Press the
You can adjust the accuracy of the printed label length in increment of -5 to +5.
1
Press the
displayed.
2
Select "Adjust Length." by using the
and then set the value by using the
3
Press the
• Press the
• Press the
• Approximately 1% of the total label length will be adjusted by 1 level.
64

Manual Cutting

Manual Cutting
key to display the setup menu, select
or key.
or key to apply the setting.
key to return to the previous step.
key to set the value to its default setting ("Off").

Adjusting the Label Length Accuracy

key. The current settings are
or key to apply the setting.
key to return to the previous step.
key to set the value to default setting.
or keys, and then
or keys.
or keys,
or keys.