Entering Bar Code Data - Brother P-touch PT-2030 User Manual

Attribute
Protocol
Width
Under#
(characters printed
below bar code)
C.Digit
(check digit)

Entering Bar Code Data

1
Press the Setup key to display the Setup menu, select "Bar Code Input" using the
or keys, and then press the OK or Enter key. The Bar Code Input screen
is displayed.
• Up to five bar codes can be entered on a label.
• Pressing the Symbol key while holding down the Shift key will also allow you to go to
"Bar Code Input".
2
Type in the bar code data.
Special characters can be entered in the bar code
when using the CODE39, CODABAR, CODE128 or
GS1-128 (UCC/EAN-128) protocols. When not using
special characters, go to step 5.
3
Press the Symbol key.
A list of characters available for the current protocol is displayed.
4
Select a character using the
the OK or Enter key to insert the character in the bar
code data.
5
Press the OK or Enter key to insert the bar code in the
label.
The bar code is displayed on the text entry screen.
Bar Code Settings
CODE39, CODE128, EAN-8, EAN-13,
GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF),
(only available for the CODE39, I-2/5
and CODABAR protocols)
or key, then press
Value
CODABAR
Small
Large
On
Off
Off
On
Creating a Bar Code Label
1
2
3
4
5
6
7
8
9
38