Adjusting The Label Length; Attaching Labels - Brother PT-2100 User Manual

You can adjust the length of the printed label in levels of -5 to +5.
Press the
1
"Adjust Length" using the
the or
Select "Adjust Length" by using the
2
then set the value by using the
Press the
3
• Press the key to return to the previous step.
• Press the
• Approximately 1% of the total label length will be adjusted by 1 level.
If necessary, trim the printed label to the desired shape and length using scissors,
1
etc.
Peel the backing from the label.
2
The backing of some types of tapes may be pre-cut to make it easier to peel the backing.
Position the label and then press firmly from top to bottom with your finger to
3
attach the label.
• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel
off easily from these surfaces.
• Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive
Tapes or other special tapes and observe all precautions noted in the instructions.

Adjusting the Label Length

key to display the setup menu, select
or
key.
or key to apply the setting.
key to set the value to default setting.

Attaching Labels

key, and then press
or key, and
or key.
Adjusting the Label Length
1
2
3
4
5
6
7
8
9
55