Using The Induction Hob; Before First Use; Cooking On The Induction Zone - Baumatic BHI100 Instruction Manual

8. Timer button
9. Minus button
10. Timer "min" light
11. Plus button

Using the induction hob

Before first use

IMPORTANT: You should clean the ceramic hob surface (see
"Cleaning and maintenance" section).
o You should switch on the hob for 5 minutes at the maximum
setting. This will help to eliminate any new smell that exists and
evaporate any humidity that has formed on the heating elements
during transit.
o You must place a saucepan filled half full with cold water on the
zone as you burn it off. Otherwise the induction zone will not
operate.

Cooking on the induction zone

o Press the ON/STANDBY button (1). A buzzer will sound and the
power light (2) will turn on.
o Place a suitable pan on the cooking zone. Make sure that the
bottom of the pan and the surface of the cooking zone are clean
and dry.
o Press the plus button (11) and the heat "W" light (4) will turn
on to indicate that the hob is heating up.
o When the appliance is first connected to the
electrical supply, the power light (2) will flash to
indicate that the hob is in a standby state.
o The hob will be set at the default heat setting of
3. You can change the heat level by using the
plus and minus buttons.
o You can adjust the heat setting at any time
during the cooking process.
10