Advertisement
13. Power On — Refer to Chapter 6 of the Encore Presentation System User's
Encore VPx Installation Guide • 08-0311105-00 Rev 00
b.
On the second stack, set the ID of the bottom stack Processor to 3 (VP
or VPx). Set the ID of the top stack Processor to 4 (VP or VPx).
Important
In each stack, the ID of the bottom stack Processor must
always be lower than the ID of the top stack Processor.
Remember that master units (ID#1 and ID#2) must be VP
only, not VPx.
Guide for all power on instructions.
båÅçêÉ=smñ=fåëí~ää~íáçå=dìáÇÉ
Installation
27
Advertisement
