9. Service Mode
Set up of an Access Control List.
1. Push the cursor key
2. Press ENTER to display the Change password menu. (menu 9-9)
Note: Only possible when Owner.
3. Push the cursor key
4. Press ENTER to display the Access Control List menu. (menu 9-10)
For each item an access possibility can be set for owner, user, guest or everybody.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
MORE...
Select with
or
then <ENTER>
<EXIT> to return
Menu 9-8
Changing an access possibility
1. Push the cursor key
2. Press ENTER to select.
3. Push the cursor key
4. Press ENTER to toggle between Y(yes) or N(no).
5. Repeat both steps if necessary.
Access Levels
An access level can be added to the following items:
•
Adjustment mode
•
Barco logo
•
Change projector address
•
File delete
•
File delete all
•
Input balance
•
Installation
•
Random access
•
Serial communication
•
Service
92
or
to highlight Change Password. (menu 9-8)
to highlight Access Control List.
or
CHANGE PASSWORD
Enter new password
OWNER 0000
USER 0000
GUEST 0000
ACCESS CONTROL LIST
Select with
or
then <ENTER>
Reprogram with
, ,
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 9-9
or
to select an item in the scroll list.
or
to select owner, user, guest or everybody.
ACCESS CONTROL LIST
Menu
O
Adj mode
Y
BARCO LOGO
Y
Change add
Y
O=owner, U=user, G=Guest
E=everybody
or
Select with
then <ENTER>
<EXIT> to return.
Menu 9-10
U
G
E
Y
Y
Y
-
-
-
Y
-
-
or
R5976483 BARCOSLM R6 17092002