Table of Contents
Advertisement
Image 5-3
Quick shift adjustment
1. Press the Selection key *, Barco key.
The zoom/focus menu will be displayed (image 5-3).
2. Press ENTER.
The shift menu will be displayed. (image 5-4)
3. Push the cursor key
4. When finished, press EXIT key to return or ENTER to continue to zoom/focus.
Image 5-4
5.4.3
Quick On Screen Color change
What can be done ?
For quick change of the on-screen color of the highlighted items.
The highlighted items on the menus can be displayed in red, green or yellow.
How to change ?
1. Press ENTER to start up the adjustment mode.
2. Push the cursor key
3. Press ENTER to select.
4. Push the cursor key
5. Press ENTER to select.
The OSD menu will be displayed. (menu 5-7)
6. Push the cursor key
7. Press ENTER to toggle between red, green and yellow.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with
or
then <ENTER>
<EXIT> to return
Menu 5-5
R5976483 BARCOSLM R6 17092002
or
to shift the image up or down and
to highlight Installation. (menu 5-5)
or
to highlight OSD. (menu 5-6)
or
to highlight Highlighted item color.
or
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with
or
then <ENTER>
<EXIT> to return
Menu 5-6
or
to shift the image left or right.
OSD
HIGHLIGHT ITEM COLOR [red]
MENU POSITION [Default]
Select with
or
then <ENTER>
<EXIT> to return
Menu 5-7
5. Getting Started
41
Advertisement
Table of Contents
