Barco BlendPRO-II User Manual page 32

5. Upgrading Software
Software Upgrade Overview
pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï
All software upgrade procedures are performed through the ScreenPRO-II Controller.
There are no user controls provided on the BlendPRO-II unit itself.
Please note:
•
32
Code compatibility — when the ScreenPRO-II Controller connects to the
individual ScreenPRO-II units and to BlendPRO-II, it automatically checks the
compatibility of the code versions.
If the ScreenPRO-II Controller's code version matches that of the ScreenPRO-II
units and BlendPRO-II, the Controller's System Status Menu is shown — and
you will not need to download code.
~
If the message "Checksum Mismatch" appears on the System Status
Menu, you must download code.
~
If the ScreenPRO-II Controller's code version is incompatible with the
either the ScreenPRO-II units' code version or the BlendPRO-II's code
version (or a combination of units), all buttons will flash on the Controller
console. The System Status Menu is shown with the message "Please
Upgrade."
Important Refer to the "ScreenPRO-II Controller User's Guide" for
complete software upgrade procedures.
BlendPRO-II • User's Guide