Instrument Kits For Dual-Probe Applications - Bacharach IEQ Chek Operation Manual

11.3. Instrument Kits for Dual-Probe Applications

Specific versions of the IEQ Chek are available in kits for dual probe applications
(see table below for part numbers). These kits include:
• the IEQ Chek™ equipped with an internal pump and two sample ports
• gas sampling probe for CO
• temperature/relative humidity sensor probe
• calibration tubing
• three 'AA' NiMH rechargeable batteries
• charge/run AC adapter
• this operation manual.
Kit Part Number
1540-0009
1540-2009
Optional accessories include:
• the IQ Chek™ datalogging kit for storing and downloading readings
• a hard carrying case for protection.
NOTE: Specific incubator versions of the IEQ Chek must be ordered through their
respective incubator application kit numbers (above). Standard IEQ Chek units
cannot be upgraded in the field.
Temperature/RH
Probe Connector
Figure 11-2. IEQ Chek for Dual-Probe Applications
1509-9001 Rev 1
and O
2
IEQ Chek™ CO
2
Temperature, RH and CO
IEQ Chek™ CO
2
for Temperature, RH, CO
IEQ Chek
with inline water/dust filter
2
Description
(0-20%), Pump, Remote Sample Probes for
2
(0-20%), O , Pump, Remote Samples Probes
2
, O
2 2

Operation Manual
High Humidity Gas
Sample Probe
Connector
29