2.6. Probe Connectors (Gas, Pressure, T-Stack)
The probe and hose assembly are connected to the analyzer by way of the
following connectors.
•
Stack-gas thermocouple to the analyzer's T-STACK connector
•
Stack-gas hose to the analyzer's GAS connector
•
Draft hose to the analyzer's +∆P connector
Observe that the probe connectors are of different sizes and shapes, which
prevents incorrect connection to their associated connectors on the analyzer.
See Figure 2-5.
0024-9473 Rev 3
Figure 2-3. Battery Compartment
Figure 2-4. Bottom View Showing Connectors
PCA
3 Manual
19