Table of Contents
Advertisement
IEQ Chek
Operation Manual
10. ACCESSORIES
10.1. Hard Shell, Foam-Lined Carrying/Transport Case
The part number for the transport case is 1509-0002.
10.2. Extended Operation (Short Term) External Battery
The extended operation external battery provides
almost double the operating time for IEQ Chek.
The battery is attached to the rear of IEQ Chek with
Velcro and is plugged into a port at the rear of
instrument. See Figure 10-1.
This extra battery pack is required only when a user
orders two high-current sensors in one instrument
(e.g., IR plus PID, or IR plus catalytic, or PID plus
catalytic). When such configurations are ordered, the
external battery pack is installed automatically at no
charge.
However, it can be ordered as an option to extend
the operational life of the battery in devices having
only one high-current-draw sensor. In such cases,
the IEQ Chek must be ordered with this accessory
(part number 1509-0005). It cannot be installed in
the field. Instruments in use can be shipped back to
be factory to be retrofitted.
10.3. Extended Operation (Long Term) External Battery
Provides enough battery power for approximately 7 to 10 days of continuous
(24 hours per day) operating time for IEQ Chek when used in areas where line
voltage is not available for the wall adapter. This battery option is installed in a hard
shell carrying case with its own battery charger and battery monitoring circuit to
maximize battery life. The part number for this option is 1509-0008.
NOTE:
Because of the size of this lead acid battery, the recharge time is
approximately 26 hours.
10.4. Standard Gas Sample Probe
This option is a 10" probe supplied with 30" of sample hose that allows the user to attach a
sample probe (wand) to reach into hard to get at areas for gas sampling. The part number
is 1509-0003.
NOTE
: This probe can remotely sample gases only. Temperature and RH sensors are
mounted on top of the IEQ Chek
10.5. IQ Chek DataLogging Kit
This option includes the IQ Chek
reader. The part number is 1509-0001.
26
and do not connect to this probe.
software, a 2GB flash card, USB cable, and SD card
Figure 10-1. Extended
Operation External Battery
1509-9001 Rev 1
Advertisement
Table of Contents
