Applying Compactflash Cards - Avery Dennison ALX 92x Operating Manual

05/09 Rev. 5.02-01
Plug-in card
You require the following to load a print job from a CF card:
A detailed description can be found in topic section „Advanced Applications",
chapter

Applying CompactFlash cards

CF = CompactFlash
[8] Example: A 32 MB CF card (T1).
Suitable CF cards: see Plugin-card manual, topic section „Card types",
chapter
Applying CF cards: see Plugin-card manual, topic section „Application",
chapter
Inserting a CF card
1. Switch off the device. Wait for 5 seconds.
2. Insert the CF card [9A] into the card slot, contact side first. The card's label
OPERATING MANUAL
•
CF card (copy the print job to the directory \FORMATS)
•
CF card reader (to connect to your computer)
Selecting files from CF card
CAUTION! - Observe the following guidelines to avoid damaging the device
or the CF card.
Only use CF -cards approved by the manufacturer.
Always wait at least 5 seconds after switching off the device before remo-
ving or inserting the CF card.
When inserting or removing the CF card, never use force.
A Slim guide notch
B Wide guide notch
C Contacts
CompactFlash card
CompactFlash card
is on the right side.
Push the CF card into the slot until the release button [9B] comes out.
The differently sized guide notches [8] of the CF card prevent the card
from being inserted wrongly. For the card to be inserted correctly, the wider
guide notch needs to be on top.
ALX 92x
on page 10.
A
C
.
.
18
Device Description
B