Avery Dennison ALX 92x Operating Manual page 6

05/09 Rev. 5.02-01
E Power socket
F (ALX 92x AI Pro only) Power socket
G Ethernet interface
H Status-LED/Ethernet
I
J Centronics interface
K 2x USB interface type B (device)
L USB interface type A (host)
M Card slot
N (Option) Second card slot
O (Option) Cable duct for OD control
P Card slot
Q (Option) Signal interface USI
OPERATING MANUAL
ALX 92x
Mains connection of the machine
Mains connection of the Applicator Interface „AI Pro".
To connect to an „Ethernet 10/100 Base T" network
RS232 interface
For serial transfer of print data
For parallel transfer of print data (cable is inclusive)
To connect devices (e.g. keyboard, scanner)
For transfer of print data
For CompactFlash cards; used for storing fonts, logos, graphics, etc.
To connect a photoelectric barrier, which checks the outer diameter of the
label material roll
– For SD/MMC cards
– Is not yet supported
– 4 inputs / 8 outputs
– 24 V signal voltage
6
Device Description