Avery Dennison ALX 92x Operating Manual page 4

05/09 Rev. 5.02-01
[2] ALX 92x operating parts
A Insert diagram
B Ribbon unwinding mandrel
C Ribbon rewinding mandrel
D Adjustment knob for printhead pressure
E Adjustment wheel for label sensor
F Material guide
OPERATING MANUAL
ALX 92x
A
B
C
D
E
Shows the path of the labelling material and ribbon
Holds the new ribbon roll
Holds the ribbon core onto which used ribbon is wound
For adjusting the printhead pressure to suit the material strength / width
Turning the wheel moves the label sensor at right angles across the mate-
rial path
Guides the material path from both sides; the material end sensor is locat-
ed on the inner side
4
Device Description
F