Installing The Standard Driver; Installing The Usb Driver - Avery Dennison AP3.4 User Manual

11/07 Rev. 4.03-01
1. Insert the CD „Printer Documentation" [4] (is delivered witih the printer).
2. Click „Printer drivers and label software".
3. Click „Installl" and then „Printer Drivers".
4. Follow the instructions of the installation wizard.
5. If you are requested to select a printer type, note the following:
6. Further follow the instructions of the installation wizard.
7. If you are back to the selection window „NiceLabel SE CD", click „Back" and
8. Close the Adobe Reader.
1. Insert the CD „Label Printing Software" (is delivered with the printer).
2. At the computer, click Start > Settings > Printer and fax devices.
3. Click File > Add printer.
4. Follow the instructions of the installation wizard.
5. If you are requested to select a printer type, click „Have disk".
6. Select on CD the file „\Utilities\AP34\WINDOWS Driver\ BS\oemprint.inf",
7. Further follow the instructions of the installation wizard.
USER MANUAL

Installing the Standard Driver

Requires the Adobe Reader to be installed on the computer.
Printer Documentation
64-xx / DPM / ALX 92x / TTX 67x / AP 7.t
TDI / Options
Link information to your product
[4] CD „Printer Documentation".
The CD starts automatically.
The window „Printer Documentation" opens.
The selection window „NiceLabel SE CD" opens.
The installation wizard welcomes you.
– Click „AP 3.4 PPLA" for an AP 3.4 with Datamax interpreter.
– Click „AP 3.4 PPLB" for an AP 3.4 with Eltron interpreter.
The driver files are copied to the computer.
then „Exit".

Installing the USB Driver

The installation wizard welcomes you.
A file selection dialog opens.
where OS stands for the Operating system on your computer.
AP 3.4
Commissioning and Operation
10