Operator Controls; Buttons - Avery Dennison AP3.4 User Manual

11/07 Rev. 4.03-01

Operator Controls

USER MANUAL
[2] Operator controls of the printer.

Buttons

There are three buttons [2], each having two basic functions
BUTTON Pressed at normal status
FEED Feed a label.
PAUSE Stop the printing process
Resume the printing job after
press it again.
CANCEL Interrupt and delete the prin-
ting job.
Force the printer to continue
working after an error had
been solved.
[Tab. 1] Overview buttons.
FEED Button
The FEED button forces the printer to feed one label when printer is idle (not
printing) or if in PAUSE state.
Holding down the FEED Button then turning on the power switch, the printer
will perform a self test and a configuration report will be printed.
AP 3.4
Pressed during power-on
Perform a self test for configu-
ration report.
Perform the media calibration.
Reset the settings at
E
Commissioning and Operation
Power switch
.
2
PROM.
4