04/10 Rev. 5.05-00
Application, Device Types
Application
Device types
AP 5.4 and AP 5.6 are available in 4 versions:
Basic
AP 5.4/5.6 equipped with serial, USB and Ethernet interface and SD-card slot.
Possible upgrade to „peripheral" version.
The following options can be integrated:
Peripheral
Like the AP 5.4/5.6 basic, but with capability to add the following options:
„Basic dispenser" or
AP 5.4/5.6 with additional built-in internal rewinder. In connection with an op-
„peripheral dispenser"
tional dispensing edge, this printer can also be used as a dispenser. If the dis-
pensing edge is replaced by a deflection plate, the printed labels are not
dispensed, but rewound together with the backing paper.
USER / SERVICE MANUAL
AP 5.4 – AP 5.6
•
Monotone printing of label stock for thermal and thermotransfer processes
•
Printing on different materials, e.g. cardboard or self-adhesive labels,
which are suitable for thermal- or thermotransfer printing
•
Processing roll and fan-folded material
•
Resolution: 8.0 or 11.8 Dot/mm (203 or 300 dpi)
•
Print speed up to 200 mm/sec (8"/s)
•
Print width:
– AP 5.6: up to 168 mm
– AP 5.4: up to 105 mm
•
Interfaces: RS -232, USB,, Ethernet, and connection for foot switch
•
Reflex sensor (top and/or bottom)
•
I/O board (signal interface and additional serial interface)
•
External rewinder (for AP 5.4 only)
•
Cutter
2
Technical Data