04/10 Rev. 5.05-00
Max. print length
The maximum print length depends on the following:
Zero line
Offset of the material zero line to the print zero line: 1 mm (what means that a
stripe of 1 mm width at the inner label margin is unprintable)
Fonts
Modifying Fonts
USER / SERVICE MANUAL
AP 5.4 – AP 5.6
•
Printer type
•
Printer resolution
•
Firmware version
•
Parameter settings regarding memory allocation (e.g.
PARAMETERS > Free store
•
17 Fixsize fonts , including OCR-A and OCR-B
•
3 scalable fonts (Speedo fonts)
•
Truetype fonts are supported
•
Optionally can Truetype, Speedo and Fixsize fonts be stored on SD-card
•
Up to factor 8 scaling in x/y direction
•
Rotation by 0, 90, 180 and 270 degrees
size)
Technical Data
SYSTEM
6