First Start Configuration Wizard - Avermedia AVerLife XVision HD User Manual

AVerLife XVision HD
Step 3:
Push back the plastic holder of the HDD until it clicks and then place the lid back
until it clicks in place.
*AVerLife XVision HD only reads one HDD at a time. Do not insert more than one HDD (either internal or external one) simultaneously.
*Do not use USB hub for HDD connection.
*AVerLife XVision HD only supports 2.5 inch HDD with a 9.5mm height.
* The HDD does not support hot plug and play function.

3.2 First Start Configuration Wizard

The first time you power on the AVerLife XVision HD unit, the Setup Wizard will show automatically as the default picture. The following steps will
guide you through to complete the initial configurations:
Step 1:
Press OK to enter the option menu. Use ▲/▼to select your desired OSD
(on-screen display) language, and press OK to confirm. Then use▼to select
Next and press OK to continue the setting.
Step 2:
When the welcome page appears, select Next and then press OK to continue.
Step 3:
Press OK to enter the option menu. Use ▲/▼and then OK to set the country
where you are located. Then use▼to select Next and press OK to continue the
setting.
*This setting is for the widget.
Step 4:
Press OK to enter the option menu. Use ▲/▼and then OK to set the city where
you are located. Then use▼to select Next and press OK to continue the setting.
*This setting is for the widget.
Step 5:
Press OK to enter the option menu. Use ▲/▼to select the time zone of your
location, and press OK to confirm. Then use▼to select Next and press OK to
continue the setting.
*This setting is for the widget.
ENG-6