Table of Contents
Advertisement
AVerLife XVision HD
Step 2:
Copy the package to the root directory of your USB device, and then connect
it to the the AVerLife XVision HD.
Step 3:
Select to update the firmware package via a USB stick. Press OK to confirm.
Device Name
Input the desired device name via the on-screen keyboard. Press the navigation
buttons on the remote control to select, OK to input. After finished, select OK to
confirm. The default device name is AVTVbox.
Set SMB Server Password
Step 1:
Press OK to call up the on-screen keyboard.
Step 2:
Press the navigation buttons on the remote control to select, OK to input the
password.
Step 3:
Re-input the password. Then press OK to confirm.
Set Media Shares
Then press OK to confirm.
Widget Settings
City
Use▲ or ▼to select your city for weather information widget. Then press OK to
confirm.
Temperature Unit
Use▲ or ▼to select desired scale of measurement for temperature. Then press
OK to confirm.
LED Brightness
Use▲ or ▼to select desired brightness level. Then press OK to confirm.
Restore
Select to restore to factory default.
Format Disk
Use this function to format the internal HDD. Press OK, and then hard disk
format process will start. Once finished, please reboot the device.
* Disk format will remove all the data stored on the HDD. Please properly
backup your data before formatting the HDD.
* If your HDD has been partitioned before. Disk format will remove the
partitions. You have to create the hard disk partition again.
Storage Capacity
Use this function to check the status of storage capacity of the internal HDD.
Power Management
Select between normal mode and Fast boot mode.
About
This page provides information about this product, such as the product name and
firmware version, etc.
N
e
t
w
o
r
k
S
e
t
t
i
n
g
s
N
e
t
w
o
r
k
S
e
t
t
i
n
g
s
Wired Connection
Choose among Auto detect, Manual, PPPoE. Then press OK to confirm.
Wireless Connection
Choose between Auto detect and Manual. Then press OK to confirm.
If you choose Manual, input the SSID and then press OK to confirm.
Connection Status
Check MAC address, connection status, IP address, subnet mask, default gateway,
and DNS.
ENG-20
Advertisement
Table of Contents
