Table of Contents
Advertisement
AVerLife XVision HD
4.7 Settings
OSD Menu
In the Settings submenu, you will find "TV Settings", "Download Settings", "Media
Share", "Audio/Video Settings", "Media Display Settings", "System Settings", and
"Network Settings". From this menu, you can set up system environment,
multimedia, advanced functions and customize your preferences.
Use ▲or▼ to select a preferred category. Then press OK to enter the sub-menu.
T
V
S
e
t
t
i
n
g
s
T
V
S
e
t
t
i
n
g
s
TV Signal Source
Select between different TV signal sources (Terrestrial TV and Cable TV), and then
press OK.
Region
Select to set the region where you are located for TV signal, and then press OK.
Channel Scan
Perform Channel Scan to search for available TV channels in your area. Press OK to
start scanning. The scanning process will be finished within a few minutes. To
abort the action, select "Cancel" or press
Once finished, the system will return to the real-time program automatically.
Channel Edit
This function enables you to edit the TV channels. Use ▲ or ▼ to select the
channel name/sequence, and then modify it. Press OK to confirm.
Internal REC time Span
Use ▲ or ▼ to select the REC time span that you wish to set (Unlimited / 30 mins
/ 60 mins / 90 mins / 120 mins / 150 mins / 180 mins).
Recording Storage
Use ▲ or ▼ to select the storage destination that you wish to save the recordings.
Press
to cancel.
Active Antenna
Use ▲ or ▼ to choose between On/Off, and OK to confirm.
*If you connect the active antenna to the RF input connector on the back of
AVerLife XVision HD, please select "On". Never enable this function when passive
antenna is used; otherwise, the device may be damaged.
*Only active antenna with a maximum of 5V,100mA is supported.
Initial Setting Wizard
Call up the first start configuration wizard.
D
o
w
n
l
o
a
d
S
e
t
t
i
n
g
s
D
o
w
n
l
o
a
d
S
e
t
t
i
n
g
s
Use ▲ or ▼and then OK to set the maximum BitTorrent download and
upload speed. Then press OK to confirm.
M
e
d
i
a
S
h
a
r
e
M
e
d
i
a
S
h
a
r
e
Media Server
Press OK to set the device as a Media Server over network. Once this function is
activated, you will be able to share the media files with other computers or device
on the same network. Select Stop and press OK if you want to disable this
function.
Network Share (Samba server)
Press OK to set the device as a Samba Server over network. Once this function is
activated, you will be able to share the media files with your network's computers.
Select Stop and press OK if you want to stop sharing.
*Please insert the HDD before using this function.
*When using Network Sharing, other functions are temporarily disabled.
ENG-18
Description
during the searching process.
Advertisement
Table of Contents
